INTERJECT INTERNATIONAL INTERJECT INTERNATIONAL INTERJECT INTERNATIONAL INTERJECT INTERNATIONAL INTERJECT INTERNATIONAL INTERJECT INTERNATIONAL INTERJECT INTERNATIONAL INTERJECT INTERNATIONAL INTERJECT INTERNATIONAL
 
DIESEL INDUCTION CLEANER
 

1. IDENTIFICATION OF THE MATERIAL AND SUPPLIER
Product Name Inter-Ject Fuel System Diesel Additive/ Cleaner/Engine Flush
Company Name Inter-Ject International Pty Ltd
Address 3/132 Ross Court. Cleveland. Qld 4163. Australia
Emergency Tel              +617 32867799
Telephone +617 32867799
Fax +617 32867733
Email peter@interject.com.au
Recommended Use Diesel fuel system additive, cleaner and engine oil flush.
   

2. HAZARDS IDENTIFICATION

Hazard Classification     Classified as hazardous under the NOHSC criteria.
Risk Phrase(s)               

R10 Flammable
R36 Irritating to eyes and skin
R65 Harmful by inhalation and if swallowed
Safety Phrase(s)             

S24 Do not breathe vapour. Avoid contact with skin and eyes. Use in ventilated areas with suitable gloves and eye protection. If swallowed, seek medical advice immediately.

                                      
D G Classification         3
Poisons Schedule           5
   

3. COMPOSITION / INFORMATION ON INGREDIENTS
Ingredients

Name                                   CAS                           Proportion
Solvent Kerosene              8008-20-6                   60 - 100%
Organic Solvents                                                    10 - 40%
   

4. FIRST AID MEASURES
Inhalation  Move victim to fresh air and seek medical treatment
Ingestion If swallowed, wash out mouth with water. Do not induce vomiting. Seek medical treatment.   
Skin

Wash off with soap and water. Remove contaminated clothing and launder before reuse.
Eye Flush eyes with large amounts of water until irritation subsides. Seek medical attention.
Other Information For advise in an emergency, contact the Poisons Information Centre (Tel: 13 1126).
   

5. FIRE FIGHTING MEASURES
Extinguishing Media     Use dry chemical or foam
Specific Hazards         

Product is flammable. Product should be stored and used in well ventilated area away from naked flames and other sources of ignition.
Hazchem Code            

3 [Y]
Precautions with Fire   Fire fighters should wear full protective clothing and self contained breathing apparatus.
   

6. ACCIDENTAL RELEASE MEASURES
Emergency Procedures Wear protective clothing to avoid exposure. Extinguish all ignition sources. For major spills, dam and recover. Prevent entry in drainage systems and waterways. Collect with absorbent material such as sand or earth. Wash area with large quantities of water. Dispose of waste according to applicable local regulations.
   

7. HANDLING AND STORAGE
Precautions for Safe Handling Storage

Product is flammable. To prevent contact and inhalation, wear appropriate protection. Do not open near open flame, sources of heat or ignition. Store in a cool dry, well ventilated area away from sources of ignition and oxidising agents, out of direct sunlight. Keep container sealed when not in use. 

   

8. EXPOSURE CONTROLS / PERSONAL PROTECTION
National Exposure Standards No exposure standards have been established for this material by the NOHSC.
Biological Limit Values Not available
Engineering Controls    The use of exhaust ventilation is recommended to control process emissions near the source.
Respiratory Protection It is recommended to use a half-face filter mask to protect from over exposure by inhalation.
Eye Protection              

Always wear safety glasses or a face shield.
Skin Protection              Always wear long sleeves and long trousers or coverall, with enclosed footwear. Wear protective gloves.
   

9. PHYSICAL AND CHEMICAL PROPERTIES
Property Unit of Measurement Typical View
Appearence   Clear, colourless liquid
Boiling Point °C 150 - 280
Flash Point °C 38
Density @ 15°C g/ml 0.80
Vapour Pressure @ 20°C kpa <0.3
Explosive Limits (LEL - UEL) % Not Available
Vapour Density @ 20°C kpa Not Available
Autoignition Temperature °C Not Available
Viscosity @ 20°C cSt Not Applicable
Percent Volatiles % 83%
Solubility with Water % w/w Insoluble
   

10. STABILITY AND REACTIVITY
Chemical Stability         Stable under normal conditions of use.
Conditions to Avoid       Sources of heat and ignition.
Hazardous Reactions     Strong  oxidisers and heat
Hazardous Decomposition Products

No decomposition products except on burning. See Fire fighting Measures.
   

11. TOXICOLOGICAL INFORMATION
Ingestion

Significant absorption gives rise to severe systemic effects. Symptoms , which vary with dosage, include headache, nausea, dizziness and tracheal burning.
Eye

Irritating to eyes, but will not permanently damage the eye tissue.
Skin

Irritating to skin, with long exposure causing dryness and cracking.
Inhalation

Discomforting to the upper respiratory tract.
Chronic Effects             

No chronic health data is available for this product.
Toxicological Information    Not Available
   

12. ECOLOGICAL INFORMATION
Ecotoxicity   No Data available
Mobility Product is highly volatile and will rapidly evaporate to the air if released into the water
Persistence/degradability   

Not available
   

13. DISPOSAL CONSIDERATIONS
Disposal Methods       

Disposal of the product must be in accordance with applicable local and national regulations.
   

14. TRANSPORT INFORMATION
UN No                             1223
Shipping Name

Solvent Kerosene
DG Class                          3
Sub Risk                            None
Pack Group                       I l I
Hazchem

3[Y]
Transport Information

This product is classed as Dangerous Goods Class 3, packing group III. Please consult the Australian Dangerous Goods Code for Transport by Road and rail for information.
   

15. REGULATORY INFORMATION
Country / Region             Australia
Inventory

AICS
Status Listed
Poisons Schedule             5
   

16. OTHER INFORMATION
Reasons for Issue            Upgrade to 16 point MSDS
   

BACK TO MSDS PAGE